Uniden USC230 Uživatelský manuál stáhnout pdf (Strana 27)

< UB375Z Operation Specification > Ver. 1.09

For Internal Use Only 22

*The displayed Quick Key for system shows the turned on its current scanning system.

For example, the scanner displays as follows if the turned off Quick Keys are “3”, “4”, “6”, and “9”.

System 01 turn Off by Quick Key.

Figure 6-15 System 01 turn Off

The details of scanning depend on whether the System is a conventional System or a trunked

System.

Change to Quick Key input screen when [．no] or numeric key is pressed.

Figure 6-16 Quick Key Input [. no] key

If user press [．no] key, then scanner selects the current Favorite List.

6.6.5.2. Scan for Trunked Systems

In trunked Scanning, the scanner holds on the control channel (C-Ch) and decodes the TGID as

they become active.

While scanning, press [E yes] key in Function Mode toggles ID Scan and ID Search alternately.

The user also can change this mode by Menu operation.

ID Search :

If a TGID does not match any avoided TGID, the scanner goes to the V-Ch and monitors the

transmission until it ends.

ID Scan :

If a TGID matches a TGID stored in an unavoided channel, the scanner goes to the V-Ch and

monitors the transmission until it ends.

While monitoring the TGID already stored into the Memory, displays current channel name,

Favorites List name, System name and Department name. And the numbers of Quick Key for

current monitoring Favorites List and System blinks.

While monitoring the TGID not stored into the Memory, displays current site name, and

monitoring TGID. And the number of Quick Key for current monitoring Favorites List and System

blinks.

While monitoring the TGID:

Turn [Rotary / FUNC] knob to return to the C-Ch. Then it waits for a moment on the C-Ch for

finding other TGID. If the scanner finds other one, it monitors found TGID. But there is only the

TGID that was being monitored just before, it monitors that TGID again.

Press [AVOID] key to avoid the TGID and store this TGID to the list of ID Avoids of the system.

This avoid information is common to every System. Then the scanner returns to the C-Ch.

If the transmission ends, it returns to the C-Ch and exclusively listens for the last-active TGID

until the system delay time expires.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 71 72

Žádné komentáře

Uniden USC230 Uživatelský manuál Strana 27